cxVideoConnectionWidget.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation 
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software 
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/

#include "cxVideoConnectionWidget.h"

#include <boost/bind.hpp>

#include <QDir>
#include <QStackedWidget>
#include <QPushButton>
#include <QFileDialog>

#include "vtkImageData.h"

#include "cxTime.h"
#include "cxLogger.h"
#include "cxProbeSector.h"
#include "cxRegistrationTransform.h"
#include "cxStringProperty.h"
#include "cxHelperWidgets.h"
#include "cxDataInterface.h"
#include "cxTrackingService.h"
#include "cxOptionsWidget.h"
#include "cxVideoService.h"
#include "cxPatientModelService.h"
#include "cxDetailedLabeledComboBoxWidget.h"
#include "cxStreamerService.h"
#include "cxVideoSource.h"
#include "cxViewService.h"
#include "cxImage.h"
#include "cxProfile.h"
#include "cxHelperWidgets.h"
#include "cxStringPropertyActiveVideoSource.h"

namespace cx
{

VideoConnectionWidget::VideoConnectionWidget(VisServicesPtr services, QWidget* parent) :
        BaseWidget(parent, "igt_link_widget", "Video Connection"),
        mServices(services)
{
        this->setToolTip("Connect to a video source");
        mOptions = profile()->getXmlSettings().descend("video");

        QString defaultConnection = mServices->video()->getConnectionMethod();
        mConnectionSelector = StringProperty::initialize("Connection", "", "Method for connecting to Video Server", defaultConnection, QStringList(), mOptions.getElement("video"));
        connect(mConnectionSelector.get(), SIGNAL(changed()), this, SLOT(selectGuiForConnectionMethodSlot()));

        connect(mServices->video().get(), &VideoService::connected, this, &VideoConnectionWidget::serverStatusChangedSlot);

        mStackedWidget = new QStackedWidget(this);
        mStackedWidgetFrame = this->wrapStackedWidgetInAFrame();
        mConnectButton = this->initializeConnectButton();
        mImportStreamImageButton = this->initializeImportStreamImageButton();
        mActiveVideoSourceSelector = this->initializeActiveVideoSourceSelector();
        mConnectionSelectionWidget = new DetailedLabeledComboBoxWidget(this, mConnectionSelector);

        mToptopLayout = new QVBoxLayout(this);
        mToptopLayout->addWidget(mConnectionSelectionWidget);
        mToptopLayout->addWidget(mStackedWidgetFrame);
        mToptopLayout->addWidget(mConnectButton);
        mToptopLayout->addWidget(mImportStreamImageButton);
        mToptopLayout->addWidget(sscCreateDataWidget(this, mActiveVideoSourceSelector));
        mToptopLayout->addStretch();

        connect(mServices->video().get(), SIGNAL(StreamerServiceAdded(StreamerService*)), this, SLOT(onServiceAdded(StreamerService*)));
        connect(mServices->video().get(), SIGNAL(StreamerServiceRemoved(StreamerService*)), this, SLOT(onServiceRemoved(StreamerService*)));

        this->addExistingStreamerServices(); //Need to add StreamerServices already existing at this point, since we will only get signals when new Services are added

        this->selectGuiForConnectionMethodSlot();
}

VideoConnectionWidget::~VideoConnectionWidget()
{
        if (mServices->video())
        {
                disconnect(mServices->video().get(), SIGNAL(StreamerServiceAdded(StreamerService*)), this, SLOT(onServiceAdded(StreamerService*)));
                disconnect(mServices->video().get(), SIGNAL(StreamerServiceRemoved(StreamerService*)), this, SLOT(onServiceRemoved(StreamerService*)));
        }
}

void VideoConnectionWidget::addExistingStreamerServices()
{
        QList<StreamerServicePtr> services = mServices->video()->getStreamerServices();
    foreach(StreamerServicePtr service, services)
        {
        this->onServiceAdded(service.get());
        }
}

void VideoConnectionWidget::onServiceAdded(StreamerService* service)
{
        QWidget* widget = this->createStreamerWidget(service);
        QWidget* serviceWidget = this->wrapVerticalStretch(widget);
        mStackedWidget->addWidget(serviceWidget);
        mStreamerServiceWidgets[service->getType()] = serviceWidget;

        this->addServiceToSelector(service);
}

QWidget* VideoConnectionWidget::createStreamerWidget(StreamerService* service)
{
//      QString serviceName = service->getName();
        QDomElement element = mOptions.getElement("video");
        std::vector<PropertyPtr> adapters = service->getSettings(element);

        OptionsWidget* widget = new OptionsWidget(mServices->view(), mServices->patient(), this);
        widget->setOptions(service->getType(), adapters, false);
        widget->setObjectName(service->getType());
        widget->setFocusPolicy(Qt::StrongFocus); // needed for help system: focus is used to display help text

        connect(mConnectionSelectionWidget, SIGNAL(detailsTriggered()), widget, SLOT(toggleAdvanced()));

        return widget;
}

void VideoConnectionWidget::onServiceRemoved(StreamerService *service)
{
        this->removeServiceFromSelector(service);
        this->removeServiceWidget(service->getType());
}

void VideoConnectionWidget::addServiceToSelector(StreamerService *service)
{
        QStringList range = mConnectionSelector->getValueRange();
        std::map<QString, QString> display = mConnectionSelector->getDisplayNames();

        range.append(service->getType());
        range.removeDuplicates();
        display[service->getType()] = service->getName();

        mConnectionSelector->setValueRange(range);
        mConnectionSelector->setDisplayNames(display);
}

void VideoConnectionWidget::removeServiceFromSelector(StreamerService *service)
{
        QStringList range = mConnectionSelector->getValueRange();

        int index = range.indexOf(service->getType());
        if(mConnectionSelector->getValue() == service->getType())
                mConnectionSelector->setValue(range[0]);
        range.removeAt(index);
        mConnectionSelector->setValueRange(range);
}

void VideoConnectionWidget::removeServiceWidget(QString name)
{
        QWidget* serviceWidget = mStreamerServiceWidgets[name];
        mStackedWidget->removeWidget(serviceWidget);
        delete serviceWidget;
        mStreamerServiceWidgets.erase(name);
}

StringPropertyActiveVideoSourcePtr VideoConnectionWidget::initializeActiveVideoSourceSelector()
{
        return StringPropertyActiveVideoSource::create(mServices->video());
}

QFrame* VideoConnectionWidget::wrapStackedWidgetInAFrame()
{
        QFrame* frame = new QFrame(this);
        frame->setFrameStyle(QFrame::StyledPanel | QFrame::Raised);
        frame->setSizePolicy(frame->sizePolicy().horizontalPolicy(), QSizePolicy::Fixed);
        QVBoxLayout* frameLayout = new QVBoxLayout(frame);
        frameLayout->addWidget(mStackedWidget);
        frame->setFocusPolicy(Qt::StrongFocus); // needed for help system: focus is used to display help text

        return frame;
}

QWidget* VideoConnectionWidget::wrapVerticalStretch(QWidget* input)
{
        QWidget* retval = new QWidget(this);
        QVBoxLayout* layout = new QVBoxLayout(retval);
        layout->addWidget(input);
        retval->setObjectName(input->objectName()); // help propagation
        layout->addStretch();
        layout->setMargin(0);
        layout->setSpacing(0);
        return retval;
}

void VideoConnectionWidget::selectGuiForConnectionMethodSlot()
{
        QString name = mConnectionSelector->getValue();
        //Need to set connection method in VideoConnectionManager before calling
        //useDirectLink(), useLocalServer() and useRemoteServer()
        mServices->video()->setConnectionMethod(name);

        QWidget* serviceWidget = mStreamerServiceWidgets[name];
        if(serviceWidget)
        {
                mStackedWidget->setCurrentWidget(serviceWidget);
                mStackedWidgetFrame->setObjectName(serviceWidget->objectName()); // for improved help
        }
}

void VideoConnectionWidget::toggleConnectServer()
{
        if (mServices->video()->isConnected())
                mServices->video()->closeConnection();
        else
                mServices->video()->openConnection();
}

QPushButton* VideoConnectionWidget::initializeConnectButton()
{
        QPushButton* connectButton = new QPushButton("Connect", this);
        connectButton->setToolTip("Connect/disconnect to the video server using the seleted method");
        connect(connectButton, SIGNAL(clicked()), this, SLOT(toggleConnectServer()));
        return connectButton;
}

QPushButton* VideoConnectionWidget::initializeImportStreamImageButton()
{
        QPushButton* importstreamimagebutton = new QPushButton("Import image from stream", this);
        importstreamimagebutton->setToolTip("Import a single image/volume from the real time stream");
        importstreamimagebutton->setDisabled(true);
        connect(importstreamimagebutton, SIGNAL(clicked()), this, SLOT(importStreamImageSlot()));

        return importstreamimagebutton;
}

void VideoConnectionWidget::serverStatusChangedSlot()
{
        mImportStreamImageButton->setEnabled(mServices->video()->isConnected());
        if (mServices->video()->isConnected())
                mConnectButton->setText("Disconnect Server");
        else
                mConnectButton->setText("Connect Server");

        this->adjustSize();
}

void VideoConnectionWidget::importStreamImageSlot()
{
        if (!mServices->video()->isConnected())
        {
                reportWarning("Video is not connected");
                return;
        }
        Transform3D rMd = Transform3D::Identity();
        ToolPtr probe = mServices->tracking()->getFirstProbe();
        VideoSourcePtr videoSource;
        if (probe)
        {
                videoSource = probe->getProbe()->getRTSource();
                rMd = calculate_rMd_ForAProbeImage(probe);
        }
        else
                videoSource = mServices->video()->getActiveVideoSource();

        if (!videoSource)
        {
                reportWarning("No Video data source");
                return;
        }
        if (!videoSource->validData())
        {
                reportWarning("No valid video data");
                return;
        }

        vtkImageDataPtr input;
        input = videoSource->getVtkImageData();
        if (!input)
        {
                reportWarning("No Video data");
                return;
        }
        QString filename = generateFilename(videoSource);

        this->saveAndImportSnapshot(input, filename, rMd);

}

Transform3D VideoConnectionWidget::calculate_rMd_ForAProbeImage(ToolPtr probe)
{
        Transform3D rMd = Transform3D::Identity();
        Transform3D rMpr = mServices->patient()->get_rMpr();
        Transform3D prMt = probe->get_prMt();
        Transform3D tMu = probe->getProbe()->getSector()->get_tMu();
        Transform3D uMv = probe->getProbe()->getSector()->get_uMv();
        rMd = rMpr * prMt * tMu * uMv;
        return rMd;
}

QString VideoConnectionWidget::generateFilename(VideoSourcePtr videoSource)
{
        vtkImageDataPtr input = videoSource->getVtkImageData();
        int* extent = input->GetExtent();
        QString filename;
        QString format = timestampSecondsFormat();
        if (extent[5] - extent[4] > 0)
                filename = "3DRTSnapshot_";
        else
                filename = "2DRTSnapshot_";

        filename += videoSource->getName() + QDateTime::currentDateTime().toString(format);
        return filename;
}

void VideoConnectionWidget::saveAndImportSnapshot(vtkImageDataPtr input, QString filename, Transform3D rMd)
{
        vtkImageDataPtr copiedImage = vtkImageDataPtr::New();
        copiedImage->DeepCopy(input);

        ImagePtr output = mServices->patient()->createSpecificData<Image>(filename);
        output->setVtkImageData(copiedImage);
        output->get_rMd_History()->setRegistration(rMd);
        mServices->patient()->insertData(output);

        mServices->view()->autoShowData(output);
        report(QString("Saved snapshot %1 from active video source").arg(output->getName()));
}

} //end namespace cx