cxDicomImporter.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation 
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software 
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/

#include "cxDicomImporter.h"

#include <QCheckBox>
#include <QMessageBox>
#include <QProgressDialog>
#include <QLabel>
#include <QFileDialog>
// ctkWidgets includes
// ctkDICOMCore includes
#include "ctkDICOMDatabase.h"
#include "ctkDICOMIndexer.h"

#include "cxReporter.h"

namespace cx
{

DicomImporter::DicomImporter(QObject* parent): QObject(parent)
{
        DICOMIndexer = QSharedPointer<ctkDICOMIndexer> (new ctkDICOMIndexer);
        IndexerProgress = 0;
        DisplayImportSummary = true;
        PatientsAddedDuringImport = 0;
        StudiesAddedDuringImport = 0;
        SeriesAddedDuringImport = 0;
        InstancesAddedDuringImport = 0;
}

DicomImporter::~DicomImporter()
{
        delete IndexerProgress;
}

void DicomImporter::setDatabase(QSharedPointer<ctkDICOMDatabase> database)
{
        if (DICOMDatabase)
        {
                disconnect(DICOMDatabase.data(), SIGNAL(patientAdded(int,QString,QString,QString)), this,
                                   SLOT(onPatientAdded(int,QString,QString,QString)));
                disconnect(DICOMDatabase.data(), SIGNAL(studyAdded(QString)), this, SLOT(onStudyAdded(QString)));
                disconnect(DICOMDatabase.data(), SIGNAL(seriesAdded(QString)), this, SLOT(onSeriesAdded(QString)));
                disconnect(DICOMDatabase.data(), SIGNAL(instanceAdded(QString)), this, SLOT(onInstanceAdded(QString)));
        }

        DICOMDatabase = database;

        if (DICOMDatabase)
        {
                connect(DICOMDatabase.data(), SIGNAL(patientAdded(int,QString,QString,QString)), this,
                                SLOT(onPatientAdded(int,QString,QString,QString)));
                connect(DICOMDatabase.data(), SIGNAL(studyAdded(QString)), this, SLOT(onStudyAdded(QString)));
                connect(DICOMDatabase.data(), SIGNAL(seriesAdded(QString)), this, SLOT(onSeriesAdded(QString)));
                connect(DICOMDatabase.data(), SIGNAL(instanceAdded(QString)), this, SLOT(onInstanceAdded(QString)));
        }
}

void DicomImporter::showIndexerDialog()
{
  if (IndexerProgress == 0)
        {
        //
        // Set up the Indexer Progress Dialog
        //
        IndexerProgress = new QProgressDialog( "DICOM Import", "Cancel", 0, 100, NULL,
                 Qt::WindowTitleHint | Qt::WindowSystemMenuHint);

        // We don't want the progress dialog to resize itself, so we bypass the label
        // by creating our own
        QLabel* progressLabel = new QLabel("Initialization...");
        IndexerProgress->setLabel(progressLabel);
        IndexerProgress->setWindowModality(Qt::ApplicationModal);
        IndexerProgress->setMinimumDuration(0);
        IndexerProgress->setValue(0);

        connect(IndexerProgress, SIGNAL(canceled()),
                                 DICOMIndexer.data(), SLOT(cancel()));

        connect(DICOMIndexer.data(), SIGNAL(progress(int)),
                        IndexerProgress, SLOT(setValue(int)));
        connect(DICOMIndexer.data(), SIGNAL(indexingFilePath(QString)),
                        progressLabel, SLOT(setText(QString)));
        connect(DICOMIndexer.data(), SIGNAL(indexingFilePath(QString)),
                        this, SIGNAL(fileIndexed(QString)));
        connect(DICOMIndexer.data(), SIGNAL(indexingFilePath(QString)),
                        this, SLOT(onFileIndexed(QString)));

        // close the dialog
        connect(DICOMIndexer.data(), SIGNAL(indexingComplete()),
                        IndexerProgress, SLOT(close()));
        // reset the database to show new data
        connect(DICOMIndexer.data(), SIGNAL(indexingComplete()),
                        this, SIGNAL(indexingCompleted()));
        // stop indexing and reset the database if canceled
        connect(IndexerProgress, SIGNAL(canceled()),
                        DICOMIndexer.data(), SLOT(cancel()));
        connect(IndexerProgress, SIGNAL(canceled()),
                        this, SIGNAL(indexingCompleted()));

        // allow users of this widget to know that the process has finished
        connect(IndexerProgress, SIGNAL(canceled()),
                        this, SIGNAL(directoryImported()));
        connect(DICOMIndexer.data(), SIGNAL(indexingComplete()),
                        this, SIGNAL(directoryImported()));
        }
  IndexerProgress->show();
}

bool DicomImporter::displayImportSummary()
{
  return DisplayImportSummary;
}

void DicomImporter::setDisplayImportSummary(bool onOff)
{
  DisplayImportSummary = onOff;
}

int DicomImporter::patientsAddedDuringImport()
{
  return PatientsAddedDuringImport;
}

int DicomImporter::studiesAddedDuringImport()
{
  return StudiesAddedDuringImport;
}

int DicomImporter::seriesAddedDuringImport()
{
  return SeriesAddedDuringImport;
}

int DicomImporter::instancesAddedDuringImport()
{
  return InstancesAddedDuringImport;
}

//----------------------------------------------------------------------------
void DicomImporter::onFileIndexed(const QString& filePath)
{
  // Update the progress dialog when the file name changes
  // - also allows for cancel button
  QCoreApplication::instance()->processEvents();
//  qDebug() << "Indexing \n\n\n\n" << filePath <<"\n\n\n";

}

//----------------------------------------------------------------------------
void DicomImporter::openImportDialog()
{
        QString folder = QFileDialog::getExistingDirectory(NULL, "Import DICOM files from directory ...", "", QFileDialog::ShowDirsOnly);
        if (!folder.isEmpty())
                onImportDirectory(folder);
        else
                reportWarning("No DICOM folder selected");
}

//----------------------------------------------------------------------------
void DicomImporter::onPatientAdded(int databaseID, QString patientID, QString patientName, QString patientBirthDate )
{
  Q_UNUSED(databaseID);
  Q_UNUSED(patientID);
  Q_UNUSED(patientName);
  Q_UNUSED(patientBirthDate);
  ++PatientsAddedDuringImport;
}

//----------------------------------------------------------------------------
void DicomImporter::onStudyAdded(QString studyUID)
{
  Q_UNUSED(studyUID);
  ++StudiesAddedDuringImport;
}

//----------------------------------------------------------------------------
void DicomImporter::onSeriesAdded(QString seriesUID)
{
  Q_UNUSED(seriesUID);
  ++SeriesAddedDuringImport;
}

//----------------------------------------------------------------------------
void DicomImporter::onInstanceAdded(QString instanceUID)
{
  Q_UNUSED(instanceUID);
  ++InstancesAddedDuringImport;
}

//----------------------------------------------------------------------------
void DicomImporter::onImportDirectory(QString directory)
{
  if (QDir(directory).exists())
        {
        // reset counts
        PatientsAddedDuringImport = 0;
        StudiesAddedDuringImport = 0;
        SeriesAddedDuringImport = 0;
        InstancesAddedDuringImport = 0;

        // show progress dialog and perform indexing
        showIndexerDialog();
        DICOMIndexer->addDirectory(*DICOMDatabase,directory);

        // display summary result
        if (DisplayImportSummary)
          {
          QString message = "Directory import completed.\n\n";
          message += QString("%1 New Patients\n").arg(QString::number(PatientsAddedDuringImport));
          message += QString("%1 New Studies\n").arg(QString::number(StudiesAddedDuringImport));
          message += QString("%1 New Series\n").arg(QString::number(SeriesAddedDuringImport));
          message += QString("%1 New Instances\n").arg(QString::number(InstancesAddedDuringImport));
          QMessageBox::information(NULL,"DICOM Directory Import", message);
          }
  }
}

} // namespace cx