cxProbeConfigWidget.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation 
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software 
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/

#include <cxProbeConfigWidget.h>
#include <QGroupBox>
#include <QInputDialog>
#include <QMessageBox>
#include <QCheckBox>
#include "cxLabeledComboBoxWidget.h"
#include "cxDoubleWidgets.h"
#include "cxToolProperty.h"
#include "cxVector3DWidget.h"
#include "cxDoubleSpanSlider.h"
#include "cxHelperWidgets.h"
#include "cxTypeConversions.h"
#include "cxDoublePairProperty.h"
#include "cxVisServices.h"

namespace cx
{

ProbeConfigWidget::ProbeConfigWidget(VisServicesPtr services, QWidget* parent) : BaseWidget(parent, "ProbeConfigWidget", "Probe Configuration")
{
        mServices = services;
        mUpdating = false;
        this->setToolTip("Edit ultrasound probe configuration");

        QVBoxLayout* topLayout = new QVBoxLayout(this);
        TrackingServicePtr ts = mServices->tracking();
        mActiveProbeConfig = StringPropertyActiveProbeConfiguration::New(ts);
        connect(mActiveProbeConfig.get(), &StringPropertyActiveProbeConfiguration::changed, this, &ProbeConfigWidget::activeProbeConfigurationChangedSlot);
        mActiveProbeConfigWidget = new LabeledComboBoxWidget(this, mActiveProbeConfig);
        topLayout->addWidget(mActiveProbeConfigWidget);

        mOrigin = Vector3DProperty::initialize("Origin",
                "Origin",
                "Origin of tool space in the probe image.\nUnits in pixels.",
                Vector3D(0,0,0),
                DoubleRange(-1000,1000,1),
                1,
                QDomNode());
        connect(mOrigin.get(), SIGNAL(changed()), this, SLOT(guiOriginSettingsChanged()));

        // define origin group
        Vector3DWidget* mOriginWidget = Vector3DWidget::createSmallHorizontal(this, mOrigin);
        mOriginWidget->showDim(2, false);

        // define cropping group
        QGroupBox* cropGroupBox = new QGroupBox("Crop Box", this);
        cropGroupBox->setToolTip("Define cropping box for the probe image.\nUnits in pixels.");
        QVBoxLayout* cropLayout = new QVBoxLayout(cropGroupBox);
        topLayout->addWidget(cropGroupBox);

        QStringList bbCaptions = QStringList() << "X (pixels)" << "Y (pixels)";
        mBBWidget = new BoundingBoxWidget(this, bbCaptions);
        cropLayout->addWidget(mBBWidget);
        connect(mBBWidget, &BoundingBoxWidget::changed, this, &ProbeConfigWidget::guiImageSettingsChanged);

        // create sector group
        QGroupBox* sectorGroupBox = new QGroupBox("Sector");
        sectorGroupBox->setToolTip("Define probe sector parameters.\nUnits in pixels and degrees.");
        QVBoxLayout* sectorLayout = new QVBoxLayout(sectorGroupBox);
        topLayout->addWidget(sectorGroupBox);

        sectorLayout->addWidget(mOriginWidget);
        DoublePairPropertyPtr depthProperty = DoublePairProperty::initialize("Depth", "Depth", "Define probe depth.\nUnits in pixels.", DoubleRange(0, 1000, 1), 1);
        mDepthWidget = new SliderRangeGroupWidget(this, depthProperty);
        connect(mDepthWidget, SIGNAL(valueChanged(double, double)), this, SLOT(guiProbeSectorChanged()));
        sectorLayout->addWidget(mDepthWidget);

        mWidth = DoubleProperty::initialize("width", "Width", "Width of probe sector", 0,
                                                DoubleRange(0, M_PI, M_PI/180), 0);
        mWidth->setInternal2Display(180.0/M_PI);
        connect(mWidth.get(), SIGNAL(changed()), this, SLOT(guiProbeSectorChanged()));
        sectorLayout->addWidget(new SpinBoxAndSliderGroupWidget(this, mWidth, 0, 0));

        // create buttons bar
        QHBoxLayout* buttonsLayout = new QHBoxLayout;
        topLayout->addLayout(buttonsLayout);

        mSyncBoxToSector = new QCheckBox("Sync Box to Sector", this);
        mSyncBoxToSector->setChecked(true);
        mSyncBoxToSector->setToolTip(""
                "Synchronize Crop Box to Probe Sector,\n"
                "changes in the sector will reset the crop box.");
        connect(mSyncBoxToSector, SIGNAL(toggled(bool)), this, SLOT(syncBoxToSectorChanged()));
        buttonsLayout->addWidget(mSyncBoxToSector);

        buttonsLayout->addStretch();
        this->createAction(this,
                        QIcon(":/icons/preset_remove.png"),
                                        "Delete the current probe config", "",
                        SLOT(deletePresetSlot()),
                        buttonsLayout);

        this->createAction(this,
                            QIcon(":/icons/preset_save.png"),
                                        "Add the current setting as a probe config", "",
                        SLOT(savePresetSlot()),
                        buttonsLayout);

        topLayout->addStretch();
}

ProbeConfigWidget::~ProbeConfigWidget()
{
}

void ProbeConfigWidget::syncBoxToSectorChanged()
{

}

void ProbeConfigWidget::savePresetSlot()
{
        if (!mActiveProbeConfig->getTool())
                return;
        ProbePtr probe = mActiveProbeConfig->getTool()->getProbe();
//      ProbeImplPtr probe = boost::dynamic_pointer_cast<ProbeImpl>(mActiveProbeConfig->getTool()->getProbe());
        if (!probe)
                return;

        // use the previously selected config as a suggestion for new config name.
        QString oldname = probe->getConfigName(probe->getConfigId());
        if (oldname.isEmpty())
                oldname = mLastKnownProbeConfigName;

        QString newName = QString("%1 (2)").arg(oldname);

    bool ok;
    newName = QInputDialog::getText(this, "Save Config",
                                         "Config Name", QLineEdit::Normal,
                                         newName, &ok);
    if (!ok || newName.isEmpty())
      return;

    QStringList existingConfigs = probe->getConfigIdList();
    QString newUid;

    // is name exists: overwrite.
    for (int i=0; i<existingConfigs.size(); ++i)
    {
        if (newName==probe->getConfigName(existingConfigs[i]))
        {
                newUid = existingConfigs[i];
        }
    }

    if (newUid.isEmpty())
    {
        newUid = newName;
//      Width: Max, Depth: 45 mm
        newUid.remove(QRegExp("(:|\\s|\\(|\\)|,)")); // remove fancy characters from uid
        QString root = newUid;
        int i=2;
        while (existingConfigs.contains(newUid))
        {
                newUid = QString("%1_%2").arg(root).arg(i++);
        }
    }

    probe->saveCurrentConfig(newUid, newName);
}

void ProbeConfigWidget::deletePresetSlot()
{
        ProbePtr probe = mActiveProbeConfig->getTool()->getProbe();
//      ProbeImplPtr probe = boost::dynamic_pointer_cast<ProbeImpl>(mActiveProbeConfig->getTool()->getProbe());
        if (!probe)
                return;

        QString message = QString("Do you really want to delete configuration\n%1?").arg(probe->getConfigName(probe->getConfigId()));
        if (QMessageBox::warning(this,
                                        "Delete Config",
                                        message,
                                        QMessageBox::No | QMessageBox::Yes) != QMessageBox::Yes)
        {
                return;
        }

        probe->removeCurrentConfig();
}


void ProbeConfigWidget::activeProbeConfigurationChangedSlot()
{
        cx::ProbePtr probe = mActiveProbeConfig->getTool()->getProbe();
        if (!probe)
                return;
        ProbeDefinition data = probe->getProbeDefinition();
        mUpdating= true;

        DoubleBoundingBox3D range(0, data.getSize().width(), 0, data.getSize().height());
        mBBWidget->setValue(data.getClipRect_p(), range);

        mOrigin->setValue(data.getOrigin_p());

        double sx = data.getSpacing()[0]; // mm/pix
        double sy = data.getSpacing()[1];

        mDepthWidget->setValue(data.getDepthStart()/sy, data.getDepthEnd()/sy);
        mDepthWidget->setRange(DoubleRange(0, range.range()[1]*1.5, 1));

        mWidth->setValue(data.getWidth());

        if (data.getType()== ProbeDefinition::tLINEAR)
        {
                mWidth->setValueRange(DoubleRange(0, range.range()[0]*1.5*sx, 1.0*sx));
                mWidth->setInternal2Display(1.0/sx);
        }
        if (data.getType()== ProbeDefinition::tSECTOR)
        {
                mWidth->setValueRange(DoubleRange(0, M_PI, M_PI/180));
                mWidth->setInternal2Display(180.0/M_PI);
        }

        if (!probe->getConfigId().isEmpty())
        {
                mLastKnownProbeConfigName = probe->getConfigName(probe->getConfigId());
        }
        mUpdating= false;
}


void ProbeConfigWidget::guiProbeSectorChanged()
{
        if (mUpdating)
                return;
        if(!mActiveProbeConfig->getTool())
                return;
        // need a cx probe here, in order to set data.
        cx::ProbePtr probe = mActiveProbeConfig->getTool()->getProbe();
        if (!probe)
                return;
        ProbeDefinition data = probe->getProbeDefinition();

//      double sx = data.getSpacing()[0]; // mm/pix
        double sy = data.getSpacing()[1];

        data.setSector(mDepthWidget->getValue().first*sy, mDepthWidget->getValue().second*sy, mWidth->getValue());

        if (mSyncBoxToSector->isChecked())
                data.updateClipRectFromSector();

        probe->setProbeDefinition(data);
}

void ProbeConfigWidget::guiImageSettingsChanged()
{
        if (mUpdating)
                return;
        // need a cx probe here, in order to set data.
        if (!mActiveProbeConfig->getTool())
                return;
        cx::ProbePtr probe = mActiveProbeConfig->getTool()->getProbe();
        if (!probe)
                return;
        ProbeDefinition data = probe->getProbeDefinition();

        data.setClipRect_p(mBBWidget->getValue());

        probe->setProbeDefinition(data);
}

void ProbeConfigWidget::guiOriginSettingsChanged()
{
        if (mUpdating)
                return;
        // need a cx probe here, in order to set data.
        if (!mActiveProbeConfig->getTool())
                return;
        cx::ProbePtr probe = mActiveProbeConfig->getTool()->getProbe();
        if (!probe)
                return;
        ProbeDefinition data = probe->getProbeDefinition();

        // if sync: move clip rect accordingly
        if (mSyncBoxToSector->isChecked())
        {
                // shift
                Vector3D shift = mOrigin->getValue() - data.getOrigin_p();
                data.setClipRect_p(transform(createTransformTranslate(shift), data.getClipRect_p()));
        }

        data.setOrigin_p(mOrigin->getValue());

        probe->setProbeDefinition(data);
}



}