cxToolConfigureWidget.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/

#include <cxToolConfigureWidget.h>

#include <QVBoxLayout>
#include <QHBoxLayout>
#include <QComboBox>
#include <QLabel>
#include <QDir>
#include <QLineEdit>
#include "cxEnumConverter.h"
#include "cxLogger.h"
#include "cxStateService.h"
#include "cxTrackingService.h"
#include "cxSelectionGroupBox.h"
#include "cxToolListWidget.h"
#include "cxHelperWidgets.h"
#include "cxTrackerConfiguration.h"

namespace cx
{

ToolConfigureGroupBox::ToolConfigureGroupBox(QWidget* parent) :
        QGroupBox(parent),
        mConfigFilesComboBox(new QComboBox()),
        mConfigFileLineEdit(new QLineEdit()),
        mReferenceComboBox(new QComboBox()),
        mModified(false)
{
        connect(stateService().get(), &StateService::applicationStateChanged, this, &ToolConfigureGroupBox::onApplicationStateChanged);

        mConfigFilesComboBox->setSizePolicy(QSizePolicy::Ignored,QSizePolicy::Expanding);
        //mConfigFilesComboBox->setMinimumSize(200, 0);
        //mConfigFilesComboBox->setSizePolicy(QSizePolicy::Expanding,QSizePolicy::Expanding);

        mToolListWidget = new ConfigToolListWidget(NULL);

        this->createTrackingSystemSelector();

//      QGroupBox* toolGroupBox = new QGroupBox();
//      toolGroupBox->setTitle("Tools");
//      QVBoxLayout* toolLayout = new QVBoxLayout();
//      toolGroupBox->setLayout(toolLayout);
//      toolLayout->addWidget(mToolListWidget);

        QGridLayout* layout = new QGridLayout(this);
        int row=0;
        layout->addWidget(new QLabel("Configuration: "), row, 0, 1, 1);
        layout->addWidget(mConfigFilesComboBox, row, 1, 1, 1);
        row++;
        layout->addWidget(new QLabel("File name: "), row, 0, 1, 1);
        layout->addWidget(mConfigFileLineEdit, row, 1, 1, 1);
        row++;
        sscCreateDataWidget(this, mTrackingSystemSelector, layout, row);
        row++;
        layout->addWidget(mToolListWidget, row, 0, 1, 2);
        layout->setRowStretch(row, 1);
        row++;
//      layout->addWidget(new QLabel("Reference: "), row, 0, 1, 1);
//      layout->addWidget(mReferenceComboBox, row, 1, 1, 1);

        QHBoxLayout* refLayout = new QHBoxLayout;
        refLayout->addWidget(new QLabel("Reference: "));
        refLayout->addWidget(mReferenceComboBox);
        refLayout->setMargin(0);
        layout->addLayout(refLayout, row, 0, 1, 2);

        //changes due to programming actions
        connect(mConfigFilesComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(configChangedSlot()));
        connect(mToolListWidget, SIGNAL(listSizeChanged()), this, SLOT(toolsChangedSlot()));
        connect(mToolListWidget, SIGNAL(toolSelected(QString)), this, SIGNAL(toolSelected(QString)));

        //changes due to user actions
        connect(mConfigFileLineEdit, SIGNAL(textEdited(const QString&)), this, SLOT(configEditedSlot()));
        connect(mToolListWidget, SIGNAL(userChangedList()), this, SLOT(configEditedSlot()));
        connect(mReferenceComboBox, SIGNAL(activated(int)), this, SLOT(configEditedSlot()));

        this->onApplicationStateChanged();
}

ToolConfigureGroupBox::~ToolConfigureGroupBox()
{}

void ToolConfigureGroupBox::setCurrentlySelectedCofiguration(QString configAbsoluteFilePath)
{
        QString cleanPath = QDir(configAbsoluteFilePath).absolutePath();
        int currentIndex = mConfigFilesComboBox->findData(cleanPath, Qt::ToolTipRole);
        if(currentIndex < 0)
        {
                currentIndex = 0;
                if (!configAbsoluteFilePath.isEmpty())
                        reportWarning("Tool configuration doesn't exist: " + cleanPath);
        }
        mConfigFilesComboBox->setCurrentIndex(currentIndex);

        mModified = false;
}

QString ToolConfigureGroupBox::getCurrenctlySelectedConfiguration() const
{
        QString retval;
        retval = mConfigFilesComboBox->itemData(mConfigFilesComboBox->currentIndex(), Qt::ToolTipRole).toString();
        return retval;
}

void ToolConfigureGroupBox::createTrackingSystemSelector()
{
        QString defaultValue = "";
        TrackerConfigurationPtr config = trackingService()->getConfiguration();
        mTrackingSystemSelector = StringProperty::initialize("trackingsystem", "Tracking System",
                                                                                                                           "Select tracking system to use",
                                                                                                                           defaultValue,
                                                                                                                           config->getSupportedTrackingSystems(),
                                                                                                                           QDomNode());
        connect(mTrackingSystemSelector.get(), SIGNAL(changed()), this, SLOT(filterToolsSlot()));
}

StringPropertyBasePtr ToolConfigureGroupBox::getTrackingSystemSelector()
{
        return mTrackingSystemSelector;
}

QString ToolConfigureGroupBox::requestSaveConfigurationSlot()
{
        QString retval;

        if(!mModified)
                return retval;

        // deconfigure toolmanager in order to be able to reread config data
        trackingService()->setState(Tool::tsNONE);

        TrackerConfiguration::Configuration current = this->getCurrentConfiguration();
        TrackerConfigurationPtr config = trackingService()->getConfiguration();
        config->saveConfiguration(current);
        mModified = false;

        this->populateConfigurations();

        return current.mUid;
}

void ToolConfigureGroupBox::onApplicationStateChanged()
{
        QString application = stateService()->getApplicationStateName();
        this->setTitle("Tool configurations for "+ application);
        this->populateConfigurations();
}

void ToolConfigureGroupBox::configChangedSlot()
{
        QString uid = mConfigFilesComboBox->itemData(mConfigFilesComboBox->currentIndex(),
                                                                                                 Qt::ToolTipRole).toString();

        TrackerConfigurationPtr config = trackingService()->getConfiguration();
        TrackerConfiguration::Configuration data = config->getConfiguration(uid);
        bool isNewConfig =      mConfigFilesComboBox->currentText().contains("<new config>");

        if (isNewConfig)
        {
                data.mTrackingSystem = enum2string(tsPOLARIS);
                data.mName = "MyConfig";
        }

        mConfigFileLineEdit->setText(data.mName);
        mConfigFileLineEdit->setEnabled(isNewConfig);
        mConfigFileLineEdit->setToolTip(data.mUid);
        mModified = true;
        mTrackingSystemSelector->setValue(data.mTrackingSystem);
        mToolListWidget->configSlot(data.mTools);
}

void ToolConfigureGroupBox::configEditedSlot()
{
        mModified = true;
}

void ToolConfigureGroupBox::toolsChangedSlot()
{
        this->populateReference();
        this->filterToolsSlot();
}

void ToolConfigureGroupBox::filterToolsSlot()
{
        QString ts = mTrackingSystemSelector->getValue();
        mToolListWidget->filterSlot(QStringList() << ts);
        mModified = true;
}

void ToolConfigureGroupBox::populateConfigurations()
{
        mConfigFilesComboBox->clear();

        TrackerConfigurationPtr config = trackingService()->getConfiguration();
        QStringList configurations = config->getConfigurationsGivenApplication();

        foreach(QString filename, configurations)
        {
                TrackerConfiguration::Configuration configuration = config->getConfiguration(filename);
                this->addConfigurationToComboBox(configuration.mName, configuration.mUid);
        }
        QString newConfig = "<new config>";
        this->addConfigurationToComboBox(newConfig, newConfig);

        int currentIndex = mConfigFilesComboBox->findText(newConfig);
        mConfigFilesComboBox->setCurrentIndex(currentIndex);
}

int ToolConfigureGroupBox::addConfigurationToComboBox(QString displayName, QString absoluteFilePath)
{
        mConfigFilesComboBox->addItem(displayName);
        int index = mConfigFilesComboBox->findText(displayName);
        mConfigFilesComboBox->setItemData(index, absoluteFilePath, Qt::ToolTipRole);

        return index;
}

TrackerConfiguration::Configuration ToolConfigureGroupBox::getCurrentConfiguration()
{
        TrackerConfiguration::Configuration retval;
        TrackerConfigurationPtr config = trackingService()->getConfiguration();
        QString application = stateService()->getApplicationStateName();

        QString filename = mConfigFileLineEdit->text();
        QString filepath = config->getConfigurationApplicationsPath();

        retval.mUid = QString("%1/%2.xml").arg(filepath).arg(filename);
        retval.mClinicalApplication = application;
        retval.mTrackingSystem = mTrackingSystemSelector->getValue();
        retval.mTools = mToolListWidget->getTools();
        retval.mReferenceTool = mReferenceComboBox->itemData(mReferenceComboBox->currentIndex(), Qt::ToolTipRole).toString();

        return retval;
}

void ToolConfigureGroupBox::populateReference()
{
        mReferenceComboBox->clear();

        int currentIndex = -1;

        TrackerConfigurationPtr config = trackingService()->getConfiguration();

        // populate list
        QStringList selectedTools = mToolListWidget->getTools();
        foreach(QString string, selectedTools)
        {
                if (config->getTool(string).mIsReference)
                        currentIndex = this->addRefrenceToComboBox(string);
        }

        // look for a selected reference
        QString configAbsoluteFilePath = mConfigFilesComboBox->itemData(mConfigFilesComboBox->currentIndex(), Qt::ToolTipRole).toString();
        QString reference = config->getConfiguration(configAbsoluteFilePath).mReferenceTool;
        currentIndex = this->addRefrenceToComboBox(reference);

        // always select a reference if available:
        if (currentIndex<0)
                currentIndex = 0;

        mReferenceComboBox->setCurrentIndex(currentIndex);
}

int ToolConfigureGroupBox::addRefrenceToComboBox(QString absoluteRefereneFilePath)
{
        int index;

        QFile file(absoluteRefereneFilePath);
        QFileInfo info(file);
        QString refUid = info.dir().dirName();

        QStringList selectedTools = mToolListWidget->getTools();
        if (!selectedTools.count(absoluteRefereneFilePath))
                return -1;

        if (refUid.isEmpty())
                return -1;

        if (mReferenceComboBox->findText(refUid) < 0)
                mReferenceComboBox->addItem(refUid);
        index = mReferenceComboBox->findText(refUid);
        mReferenceComboBox->setItemData(index, info.absoluteFilePath(), Qt::ToolTipRole);

        return index;
}


}//namespace cx