cxICPRegistrationBaseWidget.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice,
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors
   may be used to endorse or promote products derived from this software
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/
#include "cxICPRegistrationBaseWidget.h"

#include <QPushButton>
#include <QLabel>
#include <QSpinBox>
#include <QCheckBox>
#include <QGroupBox>
#include <vtkCellArray.h>
#include "cxTypeConversions.h"
#include "cxLogger.h"
#include "cxTimedAlgorithm.h"
#include "cxLabeledComboBoxWidget.h"
#include "cxRegistrationProperties.h"
#include "vesselReg/SeansVesselReg.hxx"
#include "cxMesh.h"
#include "cxView.h"
#include "cxGeometricRep.h"
#include "cxGraphicalPrimitives.h"
#include "cxRegistrationService.h"
#include "cxViewService.h"
#include "cxPatientModelService.h"
#include "cxICPWidget.h"
#include "cxMeshInView.h"
#include "cxWidgetObscuredListener.h"
#include "cxSpaceProvider.h"
#include "cxSpaceListener.h"
#include "cxProfile.h"

namespace cx
{

ICPRegistrationBaseWidget::ICPRegistrationBaseWidget(RegServicesPtr services, QWidget* parent, QString uid, QString name) :
        RegistrationBaseWidget(services, parent, uid, name)
{
        this->setLayout(new QVBoxLayout); // we need something, otherwise the widget might not be painted at all.
}

ICPRegistrationBaseWidget::~ICPRegistrationBaseWidget()
{
}

void ICPRegistrationBaseWidget::prePaintEvent()
{
        if (!mRegistrator)
        {
                this->initialize();
                this->setup();
        }

        this->initializeRegistrator();

        mICPWidget->enableRegistration(mRegistrator->isValid());
        this->updateDifferenceLines();
        mICPWidget->setRMS(mRegistrator->getResultMetric());
}

void ICPRegistrationBaseWidget::initialize()
{
        delete this->layout(); // dummy layout from construct

        mRegistrator.reset(new SeansVesselReg());
        mOptions = profile()->getXmlSettings().descend("uid");

        this->initializeProperties();

        mICPWidget = new ICPWidget(this);
        mICPWidget->setSettings(this->getAllProperties());
        connect(mICPWidget, &ICPWidget::requestRegister, this, &ICPRegistrationBaseWidget::registerSlot);

        mObscuredListener.reset(new WidgetObscuredListener(this));
        connect(mObscuredListener.get(), SIGNAL(obscured(bool)), this, SLOT(obscuredSlot(bool)));
}


void ICPRegistrationBaseWidget::initializeProperties()
{
        mAutoLTS = BoolProperty::initialize("autoLTS","Auto LTS",
                                                                                "Ignore LTS, instead attempt to find optimal value",
                                                                           this->getDefaultAutoLTS(), mOptions.getElement());
        connect(mAutoLTS.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mLTSRatio = DoubleProperty::initialize("LTSRatio", "LTS Ratio",
                                                                                   "Fraction of points in the lesser point set to use during each iteration.",
                                                                                   80, DoubleRange(20,100,1), 0, mOptions.getElement());
        connect(mLTSRatio.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mNumberOfIterations = DoubleProperty::initialize("Iterations", "Iterations",
                                                                                   "Number of iterations",
                                                                                   500, DoubleRange(1,1000,1), 0, mOptions.getElement());
        connect(mNumberOfIterations.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mStopThreshold = DoubleProperty::initialize("StopThreshold", "Stop Threshold",
                                                                                   "Differential RMS stop threshold, between iterations",
                                                                                   0.001, DoubleRange(0.0001,1,0.0001), 4, mOptions.getElement());
        connect(mStopThreshold.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mMaxTime = DoubleProperty::initialize("MaxTime", "Max Time",
                                                                                   "Maximum time spent iterating, in seconds",
                                                                                   60, DoubleRange(1,300,1), 0, mOptions.getElement());
        connect(mMaxTime.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mMargin = DoubleProperty::initialize("Margin", "Margin",
                                                                                   "Data outside a bounding box defined by the intersection\n"
                                                                                   "of the fixed/moving by a margin are cropped.",
                                                                                   40, DoubleRange(10,100,1), 0, mOptions.getElement());
        connect(mMargin.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mLinear = BoolProperty::initialize("linear","Linear",
                                                                           "Use only linear iteration",
                                                                           true, mOptions.getElement());
        connect(mLinear.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onSettingsChanged);

        mDisplayProgress = BoolProperty::initialize("progress","Display Progress",
                                                                                                "Display metric and difference lines between point sets",
                                                                           true, mOptions.getElement());
        connect(mDisplayProgress.get(), &DoubleProperty::changed, this, &ICPRegistrationBaseWidget::onDisplayProgressChanged);

        mOneStep = BoolProperty::initialize("onestep","One Step",
                                                                                "Registration is done one iteration at a time.",
                                                                           false); // note: do not store the value in this case: always reset to default.
}

std::vector<PropertyPtr> ICPRegistrationBaseWidget::getAllProperties()
{
        std::vector<PropertyPtr> properties;
        properties.push_back(mLTSRatio);
        properties.push_back(mAutoLTS);
        properties.push_back(mMargin);
        properties.push_back(mLinear);
        properties.push_back(mDisplayProgress);
        properties.push_back(mOneStep);
        properties.push_back(mNumberOfIterations);
        properties.push_back(mStopThreshold);
        properties.push_back(mMaxTime);
        return properties;
}

void ICPRegistrationBaseWidget::obscuredSlot(bool obscured)
{
        if (obscured)
        {
                mMeshInView.reset();
        }
        else
        {
                this->onSettingsChanged();
                this->onShown();
        }
}

void ICPRegistrationBaseWidget::onSpacesChanged()
{
        if (mObscuredListener->isObscured())
                return;

        this->setModified();
//      this->initializeRegistrator();

//      mICPWidget->enableRegistration(mRegistrator->isValid());
//      this->updateDifferenceLines();
//      mICPWidget->setRMS(mRegistrator->getResultMetric());
}

void ICPRegistrationBaseWidget::onSettingsChanged()
{
        if (mObscuredListener->isObscured())
                return;
        mRegistrator->mt_auto_lts = mAutoLTS->getValue();
        mRegistrator->mt_ltsRatio = mLTSRatio->getValue();
        mRegistrator->mt_doOnlyLinear = mLinear->getValue();
        mRegistrator->margin = mMargin->getValue();
        mRegistrator->mt_maximumNumberOfIterations = mNumberOfIterations->getValue();
        mRegistrator->mt_distanceDeltaStopThreshold = mStopThreshold->getValue();
        mRegistrator->mt_maximumDurationSeconds = mMaxTime->getValue();
}

void ICPRegistrationBaseWidget::registerSlot()
{
//      int lts_ratio = mLTSRatioSpinBox->value();
//      double stop_delta = 0.001; //TODO, add user interface
//      double lambda = 0; //TODO, add user interface
//      double sigma = 1.0; //TODO, add user interface
//      bool lin_flag = mLinearCheckBox->isChecked(); //TODO, add user interface
//      int sample = 1; //TODO, add user interface
//      int single_point_thre = 1; //TODO, add user interface
//      bool verbose = 1; //TODO, add user interface

        mRegistrator->notifyPreRegistrationWarnings();

        if (mRegistrator->mt_auto_lts)
        {
                reportDebug("Using automatic lts_ratio");
        }
        else
        {
                reportDebug("Using lts_ratio: " + qstring_cast(mRegistrator->mt_ltsRatio));
        }

        bool success = false;
        if (mOneStep->getValue())
                success = mRegistrator->performOneRegistration();
        else
                success = mRegistrator->execute();

        if (!success)
        {
                reportWarning("ICP registration failed.");
                return;
        }

        Transform3D linearTransform = mRegistrator->getLinearResult();
        std::cout << "v2v linear result:\n" << linearTransform << std::endl;
        //std::cout << "v2v inverted linear result:\n" << linearTransform.inverse() << std::endl;

        mRegistrator->checkQuality(linearTransform);

        // The registration is performed in space r. Thus, given an old data position rMd, we find the
        // new one as rM'd = Q * rMd, where Q is the inverted registration output.
        // Delta is thus equal to Q:
        Transform3D delta = linearTransform.inv();
        //std::cout << "delta:\n" << delta << std::endl;

        this->applyRegistration(delta);
}


void ICPRegistrationBaseWidget::updateDifferenceLines()
{
        if (!mMeshInView)
                mMeshInView.reset(new MeshInView(mServices->view()));

        bool show = mDisplayProgress->getValue() && mRegistrator->isValid();
        if (show)
                mMeshInView->show(mRegistrator->getDifferenceLines());
        else
                mMeshInView->hide();
}

void ICPRegistrationBaseWidget::onDisplayProgressChanged()
{
        this->updateDifferenceLines();
}


} // namespace cx