cxDataLocations.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation 
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software 
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/
#include "cxDataLocations.h"

#include <iostream>
#include <QApplication>
#include <QDir>
#include "cxConfig.h"
#include "cxSettings.h"
#include "cxFileHelpers.h"
#include "cxTypeConversions.h"
#include "cxReporter.h"
#include "cxProfile.h"

namespace cx
{

//---------------------------------------------------------
bool DataLocations::mTestMode = false;
bool DataLocations::mRunFromBuildFolder = false;
bool DataLocations::mBuildFolderChecked = false;
QString DataLocations::mWebsiteUrl = "";
//---------------------------------------------------------

void DataLocations::setTestMode()
{
        mTestMode = true;
        cx::removeNonemptyDirRecursively(getTestDataPath() + "/temp");
}

QString DataLocations::getTestDataPath()
{
        QString settingsPath = cx::DataLocations::getRootConfigPath() + "/settings";
        QString dataRootConfigFile = settingsPath + "/data_root_location.txt";
        if (QFileInfo(dataRootConfigFile).exists())
        {
                return readTestDataPathFromFile(dataRootConfigFile);
        }
        else
        {
                return CX_DATA_ROOT;
        }
}

QString DataLocations::getLargeTestDataPath()
{
        QString settingsPath = cx::DataLocations::getRootConfigPath() + "/settings";
        QString dataRootConfigFile = settingsPath + "/large_data_root_location.txt";
        if (QFileInfo(dataRootConfigFile).exists())
        {
                return readTestDataPathFromFile(dataRootConfigFile);
        }
        else
        {
                return CX_LARGE_DATA_ROOT;
        }
}

QString DataLocations::getExistingTestData(QString pathRelativeToTestDataRoot, QString filename)
{
        QString path;

        path = QString("%1/%2/%3").arg(getTestDataPath()).arg(pathRelativeToTestDataRoot).arg(filename);
        if (QFileInfo(path).exists())
                return path;

        path = QString("%1/%2/%3").arg(getLargeTestDataPath()).arg(pathRelativeToTestDataRoot).arg(filename);
        if (QFileInfo(path).exists())
                return path;

        return "";
}

QString DataLocations::readTestDataPathFromFile(QString filename)
{
        QFile file(filename);
        file.open(QFile::ReadOnly);
        QString cxDataRoot(file.readAll());
        return cxDataRoot;
}

QString DataLocations::getPersistentWritablePath()
{
        QString homepath = QDir::homePath() + "/" + CX_SYSTEM_BASE_NAME + "_settings";

        if (mTestMode)
                homepath = getTestDataPath() + "/temp";

        return homepath;
}

void DataLocations::deletePersistentWritablePath()
{
    QString pathToDelete = DataLocations::getPersistentWritablePath();
    QDir dir(pathToDelete);
    CX_LOG_INFO() << "Going to delete:" << dir.absolutePath();
    dir.removeRecursively();
}


QString DataLocations::getBundlePath()
{
    // This method is becoming problematic (2015-11-30/CA):
    // the APPLE case returns path to folder enclosing the bundle
    // while the LINUX/WIN case returns path to bin folder.
    // This is not symmetric - it should be. Try to migrate away from this
    // method, using applicationDirPath instead, and remove it.
    //
#ifdef __APPLE__
        QString path(qApp->applicationDirPath()+"/../../..");
        QString bundle = QDir(qApp->applicationDirPath()+"/../..").canonicalPath();
        if (QFileInfo(bundle).isBundle())
        return QDir(path).canonicalPath();
        else
                return qApp->applicationDirPath();
#else
        QString path(qApp->applicationDirPath());
        return path;
#endif
}

QStringList DataLocations::getDefaultPluginsPath()
{
        QStringList retval;

        if(!isRunFromBuildFolder())
        {
                QString appPath(qApp->applicationDirPath());

                QString installLocation = appPath;
#ifndef CX_WINDOWS
                installLocation = appPath + "/plugins";
#endif
                if (QFile(installLocation).exists())
                        retval << installLocation;

                QString fallbackInstallLocation = appPath;
                if (QFile(fallbackInstallLocation).exists())
                        retval << fallbackInstallLocation;      }
        else
        {
                QString bundlePath = DataLocations::getBundlePath();

                QString buildLocation = bundlePath;
#ifndef CX_WINDOWS
                buildLocation = bundlePath + "/plugins";
#endif
                if (QFile(buildLocation).exists())
                        retval <<  buildLocation;
        }

        return retval;
}

QString DataLocations::getRootConfigPath()
{
        QStringList paths = getRootConfigPaths();
        if (paths.empty())
                return "";
        return paths.front();
}

QStringList DataLocations::getRootConfigPaths()
{
        if(!isRunFromBuildFolder())
        {
         // look for installed location
        QString path = QString("%1/%2").arg(qApp->applicationDirPath()).arg(CX_CONFIG_ROOT_RELATIVE_INSTALLED);
                if (QDir(path).exists())
                        return QStringList() << QDir(path).canonicalPath();
                else
                {
                        std::cout << "DataLocations::getRootConfigPaths(): Cannot find config root path: " << path << std::endl;
                        return QStringList();
                }
        }

        QStringList retval;
        if (QDir(CX_CONFIG_ROOT).exists()) // look for folder in source code
                retval << QDir(CX_CONFIG_ROOT).canonicalPath();
        if (QDir(CX_OPTIONAL_CONFIG_ROOT).exists()) // look for folder in source code
                retval << QDir(CX_OPTIONAL_CONFIG_ROOT).canonicalPath();

        return retval;
}

QString DataLocations::getDocPath()
{
        if(!isRunFromBuildFolder())
        {
        QString path = QString("%1/%2").arg(qApp->applicationDirPath()).arg(CX_DOC_ROOT_RELATIVE_INSTALLED);
//              QString path = getBundlePath() + "/" + CX_DOC_ROOT_RELATIVE_INSTALLED; // look for installed location
                if (QDir(path).exists())
                        return QDir(path).canonicalPath();
                else
                {
                        CX_LOG_ERROR() << QString("Cannot find doc path: ") << path;
                        return "";
                }
        }

        if (QDir(CX_DOC_ROOT).exists()) // look for folder in source code
                return QDir(CX_DOC_ROOT).canonicalPath();
        else
        {
                CX_LOG_ERROR() << QString("Cannot find doc path: ") << CX_DOC_ROOT;
                return "";
        }
}

QStringList DataLocations::appendStringToAllElements(QStringList root, QString suffix)
{
        QStringList retval;
        for (int i=0; i<root.size(); ++i)
                retval << root[i] + suffix;
        return retval;
}

namespace
{
QString changeExtension(QString name, QString ext)
{
        QStringList splitName = name.split(".");
        splitName[splitName.size()-1] = ext;
        return splitName.join(".");
}
} //namespace

QString DataLocations::getCachePath()
{
        QString path(getPersistentWritablePath()+"/cache/");
        return path;
}

QString DataLocations::findConfigFolder(QString pathRelativeToConfigRoot, QString alternativeAbsolutePath)
{
        return findConfigPath("", pathRelativeToConfigRoot, alternativeAbsolutePath);
}

QString DataLocations::findConfigPath(QString fileName, QString pathRelativeToConfigRoot, QString alternativeAbsolutePath)
{
        QFileInfo filePath(findConfigFilePath(fileName, pathRelativeToConfigRoot, alternativeAbsolutePath));
    return filePath.absolutePath() + "/";
}

QString DataLocations::findConfigFilePath(QString fileName, QString pathRelativeToConfigRoot, QString alternativeAbsolutePath)
{
        QStringList paths;
        foreach (QString root, getRootConfigPaths())
        {
                QString path = root + "/" + pathRelativeToConfigRoot + "/" + fileName;
                paths << path;
                if (QFileInfo(path).exists())
                        return path;
        }

        QString path = QString(alternativeAbsolutePath + "/" + fileName);
        paths << path;
        if (QFileInfo(path).exists())
                return path;

        reportWarning("DataLocations::findConfigFile. Error: Can't find " + fileName + " in any of\n" + paths.join("  \n"));
        return "";
}

QString DataLocations::checkExecutableExist(QString path, QString filename)
{
        QStringList retval;
        path = QDir::cleanPath(path);
        if (QDir(path).exists(filename))
                return QDir(DataLocations::getBundlePath()).absoluteFilePath(path + "/" + filename);
        return "";
}

QString DataLocations::findExecutableInStandardLocations(QString filename)
{
        QString result;
//#ifdef __APPLE__
//      // run from installed folder on mac
//      result = DataLocations::checkExecutableExist(qApp->applicationDirPath(), filename);
//      if (!result.isEmpty())
//              return result;
//#endif
        // run from installed or build bin folder
    result = DataLocations::checkExecutableExist(qApp->applicationDirPath(), filename);
        if (!result.isEmpty())
                return result;

        return result;
}

void DataLocations::setWebsiteURL(QString websiteUrl)
{
    mWebsiteUrl = websiteUrl;
}

QString DataLocations::getWebsiteURL()
{
    return mWebsiteUrl;
}

QString DataLocations::getUploadsUrl()
{
    return QString("http://custusx.org/uploads");
}

QString DataLocations::getWebsiteUserDocumentationURL()
{
        QString version(CustusX_VERSION_STRING);
        if (version.contains("dev"))
                version = "nightly";
    QString url = QString("%1/user_doc/%2")
            .arg(DataLocations::getUploadsUrl())
                        .arg(version);
        return url;
}

bool DataLocations::isRunFromBuildFolder()
{
        if(!mBuildFolderChecked)
        {
                QString bundlePath = DataLocations::getBundlePath();

                //Check if cxConfig.h file exists relative to the run application
                QString pathToConfigFile = bundlePath + "/../source/resource/core/settings/cxConfig.h";
                if (QFile(pathToConfigFile).exists())
                {
                        std::cout << "Using paths from build folder" << std::endl;
                        mRunFromBuildFolder = true;
                }
                else
                        mRunFromBuildFolder = false;
                mBuildFolderChecked = true;
        }

        return mRunFromBuildFolder;
}

} // namespace cx