cxBronchoscopyRegistrationWidget.cpp

Go to the documentation of this file.

/*=========================================================================
This file is part of CustusX, an Image Guided Therapy Application.

Copyright (c) 2008-2014, SINTEF Department of Medical Technology
All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, 
   this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, 
   this list of conditions and the following disclaimer in the documentation 
   and/or other materials provided with the distribution.

3. Neither the name of the copyright holder nor the names of its contributors 
   may be used to endorse or promote products derived from this software 
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=========================================================================*/

#include "cxBronchoscopyRegistrationWidget.h"
#include <vtkPolyData.h>
#include "cxTransform3D.h"
#include "cxDataSelectWidget.h"
#include "cxTrackingService.h"
#include "cxMesh.h"
#include "cxSelectDataStringProperty.h"
#include "cxRecordSessionWidget.h"
#include "cxRecordSession.h"
#include "cxView.h"
#include "cxToolRep3D.h"
#include "cxToolTracer.h"
#include "cxBronchoscopyRegistration.h"
#include "cxLogger.h"
#include "cxTypeConversions.h"
#include "cxPatientModelService.h"
#include "cxRegistrationService.h"
#include "cxViewService.h"
#include "cxStringProperty.h"
#include "cxLabeledComboBoxWidget.h"
#include "cxTrackingService.h"
#include "cxDoubleProperty.h"
#include "cxProfile.h"
#include "cxHelperWidgets.h"
#include "cxBoolProperty.h"
#include "cxCheckBoxWidget.h"
#include "cxRepContainer.h"
#include "cxWidgetObscuredListener.h"
#include "cxViewGroupData.h"
#include "cxStringPropertySelectTool.h"
#include "cxHelperWidgets.h"
#include "cxAcquisitionService.h"
#include "cxRegServices.h"
#include "cxRecordTrackingWidget.h"


namespace cx
{
BronchoscopyRegistrationWidget::BronchoscopyRegistrationWidget(RegServicesPtr services, QWidget* parent) :
        RegistrationBaseWidget(services, parent, "org_custusx_registration_method_bronchoscopy_widget",
                                                   "Bronchoscopy Registration"),
        mBronchoscopyRegistration(new BronchoscopyRegistration()),
        mServices(services),
        mRecordTrackingWidget(NULL)
{
        mVerticalLayout = new QVBoxLayout(this);
}

void BronchoscopyRegistrationWidget::prePaintEvent()
{
        if (!mRecordTrackingWidget)
        {
                this->setup();
        }
}

void BronchoscopyRegistrationWidget::setup()
{
        mOptions = profile()->getXmlSettings().descend("bronchoscopyregistrationwidget");

        mSelectMeshWidget = StringPropertySelectMesh::New(mServices->patient());
        mSelectMeshWidget->setValueName("Centerline: ");

        //this->initializeTrackingService();

        connect(mServices->patient().get(),&PatientModelService::patientChanged,this,&BronchoscopyRegistrationWidget::clearDataOnNewPatient);

        mProcessCenterlineButton = new QPushButton("Process centerline");
        connect(mProcessCenterlineButton, SIGNAL(clicked()), this, SLOT(processCenterlineSlot()));
        mProcessCenterlineButton->setToolTip(this->defaultWhatsThis());

//      mBronchoscopeRegistrationPtr = BronchoscopeRegistrationPtr(new BronchoscopePositionProjection());
//      mProjectionCenterlinePtr->createMaxDistanceToCenterlineOption(mOptions.getElement());

        mRegisterButton = new QPushButton("Register");
        connect(mRegisterButton, SIGNAL(clicked()), this, SLOT(registerSlot()));
        mRegisterButton->setToolTip(this->defaultWhatsThis());

        mRecordTrackingWidget = new RecordTrackingWidget(mOptions.descend("recordTracker"),
                                                                                                         mServices->acquisition(), mServices,
                                                                                                         "bronc_path",
                                                                                                         this);
        mRecordTrackingWidget->getSessionSelector()->setHelp("Select bronchoscope path for registration");
        mRecordTrackingWidget->getSessionSelector()->setDisplayName("Bronchoscope path");

        mVerticalLayout->setMargin(0);
        mVerticalLayout->addWidget(new DataSelectWidget(mServices->view(), mServices->patient(), this, mSelectMeshWidget));

        this->selectSubsetOfBranches(mOptions.getElement());
        this->createMaxNumberOfGenerations(mOptions.getElement());
        this->useLocalRegistration(mOptions.getElement());
        this->createMaxLocalRegistrationDistance(mOptions.getElement());

//      PropertyPtr maxLocalRegistrationDistance = mProjectionCenterlinePtr->getMaxLocalRegistrationDistanceOption();

        mVerticalLayout->addWidget(new CheckBoxWidget(this, mUseSubsetOfGenerations));
        mVerticalLayout->addWidget(createDataWidget(mServices->view(), mServices->patient(), this, mMaxNumberOfGenerations));
        mVerticalLayout->addWidget(mProcessCenterlineButton);
        mVerticalLayout->addWidget(mRecordTrackingWidget);
        mVerticalLayout->addWidget(new CheckBoxWidget(this, mUseLocalRegistration));
        mVerticalLayout->addWidget(createDataWidget(mServices->view(), mServices->patient(), this, mMaxLocalRegistrationDistance));
        mVerticalLayout->addWidget(mRegisterButton);

        mVerticalLayout->addStretch();
}

QString BronchoscopyRegistrationWidget::defaultWhatsThis() const
{
        return QString();
}

void BronchoscopyRegistrationWidget::initializeTrackingService()
{
        if(mServices->tracking()->getState() < Tool::tsCONFIGURED)
                mServices->tracking()->setState(Tool::tsCONFIGURED);
}

void BronchoscopyRegistrationWidget::processCenterlineSlot()
{
        this->initializeTrackingService();

        if(!mSelectMeshWidget->getMesh())
        {
                reportError("No centerline");
                return;
        }
        vtkPolyDataPtr centerline = mSelectMeshWidget->getMesh()->getVtkPolyData();//input
        Transform3D rMd = mSelectMeshWidget->getMesh()->get_rMd();
        vtkPolyDataPtr processedCenterline;
        if (mUseSubsetOfGenerations->getValue())
                processedCenterline = mBronchoscopyRegistration->processCenterline(centerline, rMd, mMaxNumberOfGenerations->getValue());
        else
                processedCenterline = mBronchoscopyRegistration->processCenterline(centerline, rMd);

        if (!mMesh)
        {
                QString uid = mSelectMeshWidget->getMesh()->getUid() + "_cl%1";
                QString name = mSelectMeshWidget->getMesh()->getName()+" cl_processed%1";
                std::cout << "name: " << name << std::endl;
                std::cout << "uid: " << uid << std::endl;
                mMesh = mServices->patient()->createSpecificData<Mesh>(uid, name);
        }
        mMesh->setVtkPolyData(processedCenterline);
        mMesh->setColor(QColor(0, 0, 255, 255));
        mServices->patient()->insertData(mMesh);
        mServices->view()->autoShowData(mMesh);
}

void BronchoscopyRegistrationWidget::registerSlot()
{
        if(!mBronchoscopyRegistration->isCenterlineProcessed())
        {
                reportError("Centerline not processed");
                return;
        }

        Transform3D old_rMpr = mServices->patient()->get_rMpr();//input to registrationAlgorithm
    //std::cout << "rMpr: " << std::endl;
    //std::cout << old_rMpr << std::endl;

        TimedTransformMap trackerRecordedData_prMt = mRecordTrackingWidget->getRecordedTrackerData_prMt();

        if(trackerRecordedData_prMt.empty())
        {
        reportError("No positions");
        return;
    }

        Transform3D new_rMpr;

    if(mUseLocalRegistration->getValue()){
                std::cout << "Running local registration with max distance " << mMaxLocalRegistrationDistance->getValue() << " mm." << std::endl;
                new_rMpr = Transform3D(mBronchoscopyRegistration->runBronchoscopyRegistration(trackerRecordedData_prMt,old_rMpr,mMaxLocalRegistrationDistance->getValue()));
    }
    else{
        std::cout << "Running global registration." << std::endl;
                new_rMpr = Transform3D(mBronchoscopyRegistration->runBronchoscopyRegistration(trackerRecordedData_prMt,old_rMpr,0));
    }

    new_rMpr = new_rMpr*old_rMpr;//output
        mServices->registration()->applyPatientRegistration(new_rMpr, "Bronchoscopy centerline to tracking data");

    Eigen::Matrix4d display_rMpr = Eigen::Matrix4d::Identity();
            display_rMpr = new_rMpr*display_rMpr;
    std::cout << "New prMt: " << std::endl;
        for (int i = 0; i < 4; i++)
            std::cout << display_rMpr.row(i) << std::endl;

//      mRecordTrackingWidget->showSelectedRecordingInView();

}

void BronchoscopyRegistrationWidget::createMaxNumberOfGenerations(QDomElement root)
{
        mMaxNumberOfGenerations = DoubleProperty::initialize("Max number of generations in centerline", "",
        "Set max number of generations centerline", 4, DoubleRange(0, 10, 1), 0,
                                        root);
        mMaxNumberOfGenerations->setGuiRepresentation(DoublePropertyBase::grSLIDER);
}

void BronchoscopyRegistrationWidget::selectSubsetOfBranches(QDomElement root)
{
        mUseSubsetOfGenerations = BoolProperty::initialize("Select branch generations to be used in registration", "",
                                                                                                                                                        "Select branch generations to be used in registration", false,
                                                                                                                                                                root);
}

void BronchoscopyRegistrationWidget::useLocalRegistration(QDomElement root)
{
        mUseLocalRegistration = BoolProperty::initialize("Use local registration", "",
                                                                                                                                                        "Use local registration", false,
                                                                                                                                                                root);
}

void BronchoscopyRegistrationWidget::createMaxLocalRegistrationDistance(QDomElement root)
{
        mMaxLocalRegistrationDistance = DoubleProperty::initialize("Max local registration distance (mm)", "",
        "Set max distance for local registration in mm", 30, DoubleRange(1, 200, 1), 0,
                                        root);
        mMaxLocalRegistrationDistance->setGuiRepresentation(DoubleProperty::grSLIDER);
}

void BronchoscopyRegistrationWidget::clearDataOnNewPatient()
{
        mMesh.reset();
}
} //namespace cx